WARNING: This Product Contains nicotine. Nicotine is an addictive chemical.

  1. Home
  2. HARDWARE
  3. TANKS / CLEAROMIZERS / CARTOMIZERS
  4. Sub-Ohm/Direct Lung Inhale Tanks and Coils
  5. Top Fill Direct lung Inhale Tanks
  6. Eleaf MELO 2 Sub ohm Temp Control tank

Eleaf MELO 2 Sub ohm Temp Control tank

2 Review(s) Write a Review
Your Price: $26.99
Retail Price:$29.99
Your Savings:$3.00(10%)
Part Number: HEC512-MELO-2
Availability: IN STOCK
WARNING!
The MELO Tank cannot be used on any device that is not capable of at least handling a 0.5ohm load. If your battery/device is not capable of this type of load then you will damage it by using this tank with it.

DOA Warranty
The following item is the replacement coil for this tank: 


MELO 2 Atomizer

Product Introduction:
With large liquid capacity of 4.5ml, the new MELO 2 atomizer is remarkably convenient to use, mainly featuring its simple structure and side e-liquid fill hole for ease of parts cleaning and e-liquid refilling.

When used with EC TC-Ni/EC TC-Ti head, the MELO 2 atomizer can be compatible with various temperature control devices, especially the iStick TC60W.

MELO 2 Atomizer
Standard configuration :
1×MELO 2 Mouthpiece1×MELO 2 Atomizer Tube1×MELO 2 Atomizer Base
1×EC Head (0.3ohm)1×EC TC-Ni Head (0.15ohm)1×EC TC-Ti Head (0.5ohm)
4×Sealing Ring1×Manual
MELO 2 Atomizer
MELO 2 Atomizer
Parameter:
Length: 66mm
Diameter: 22mm
Capacity: 4.5ml
Thread type: 510 thread
Main material: 304 stainless steel

Color: Silver


Features:


1) Optional types of EC heads–EC head and EC TC head, separately supports normal VW (Variable Wattage) device and smart TC (Temperature Control) device.
MELO 2 Atomizer
MELO 2 Atomizer
2) The side e-liquid fill hole is designed for ease of refilling e-liquid.
MELO 2 Atomizer
MELO 2 Atomizer
3) It comes with large liquid capacity of 4.5ml, reducing the frequency of refilling e-liquid.
4) The amount of airflow can easily be adjusted by rotating the flexible airflow control ring on the atomizer base so as to get different vaping experiences.
MELO 2 Atomizer
MELO 2 Atomizer
5) The metal mouthpiece packs with excellent characteristic of heat insulation.
6) All the EC series atomizer heads are applied with 100% pure cotton wick.
MELO 2 Atomizer

How to add liquid:

The e-liquid fill hole is located in the side of the top cap of atomizer tube. Rotate counterclockwise the regulation ring on the top cap to open the e-liquid fill hole. Then slowly refill e-liquid into the glass tube. Finally close the e-liquid fill hole by rotating clockwise the regulation ring.
MELO 2 Atomizer
Note: 
a) Please first drip a few drops of e-liquid directly into the pure cotton wick in the atomizer head so as to make it fully soaked before vaping. 
b) Please don’t overfill and make sure the liquid level is between 10%-90%;
c) Please make sure the air-inlet holes on the atomizer base are closed before refilling e-juice.
MELO 2 Atomizer

How to replace atomizer head?

1. First pull the atomizer base out of the MELO 2 atomizer;
2. Then screw off the atomizer head from the atomizer base;
3. Finally screw a new atomizer head tightly onto the atomizer base.
MELO 2 Atomizer

Reward Points

27 points will be rewarded to you when you buy this item.

Recently Viewed Items