My Account  |  0 item(s)    View Cart
Joyetech CUBOID Mini Full Kit

Joyetech CUBOID Mini Full Kit

On sale $40.00
Retail Price:$89.99
Your Savings:$49.99(56%)
Part Number:HEC606-CBDMNI
  • Short Description:80W/ 2400mAh built in battery/ Ni, Ti, SS316, and TCR Temp modes available/ Wattage and Bypass power modes/ 5ml leakproof tank/ uses CUBIS Coils/ Upgradable Firmware/ very compact yet powerful
  • Rewards:You will earn 40 rewards points for purchasing this item.

Choose Options

White Kit
Grey Kit


Cuboid Mini Kit
Cuboid Mini Kit
Cuboid Mini Kit Cuboid Mini kit with the new NotchCoilTM 0.25ohm DL. head brings you great vaping experience ever. It lasts longer and can be used under high wattage condition. With the special oblong shape the Cuboid Mini Atomizer can perfectly match the device. The Cuboid Mini applies two sets of battery protection circuit system which makes it more advanced and reliable. Carrying Variable Temperature Control system, built-in battery and multiple attractive colors, it is more practical and attractive catering to your preference. Also, upgradable firmware always enables it up-to-date.

Standard Configuration:
  • 1*Cuboid Mini
  • 1*Cuboid Mini Atomizer
  • 1*NotchCoilTM 0.25ohm DL.
  • 1*BF SS316-0.5ohm
  • 1*BF Clapton-1.5ohm
  • 1*BF RBA M&L. (Vertical)
  • 2*Mouthpiece
  • 1*USB Cable
  • 1*Manual
  • 1*Warranty Card

Cuboid Mini Kit Specification:
Size: 35.50mm x 22.50mm x 124.50mm
Battery Capacity: 2400mAh
Atomizer Capacity: 5.0ml
Output Mode: VT-Ti/VT-Ni/VT-SS316/VW/BYPASS/TCR Mode
Output Wattage: 1-80W
Resistance Range: 0.05-1.5ohm for VT mode
Resistance Range: 0.1-3.5ohm for VW/BYPASS mode
Temperature Range: 100-315°C/ 200-600°F
Colors: Black, Silver, Grey, White, Gold
Cuboid Mini Kit

Compact yet Powerful
The Cuboid Mini comes with the similar design of the Cuboid but in a tiny shape, which is much easier to grip It is powered by a 2400mAh built-in battery, whose maximum output can be reached to 80W.

Dual Circuit Protection
Cuboid Mini applies two sets of battery protection circuit system, realizing overall battery protection of
over-charging, over-current and over-discharging, which makes it more safe and reliable.

Newly Added NotchCoilTM 0.25ohm DL. Head
We kindly recommend the new NotchCoilTM 0.25ohm DL. (Direct Lung) head which lasts longer and can be used under high
wattage condition. It will surely bring you great vaping experience ever.
Cuboid Mini Kit

Exclusive TFTA-Tank Technology
This TFTA-Tank (top filling and top airflow tank) allows the top section and coil to be removed and as one solid unit. 
Coil replacement and juice fill can be achieved by removing this top section from the cup.
Cuboid Mini Kit
Detachable and Washable Structure
With its special structure, Cuboid Mini Atomizer can be easily detached and is able to wash separately.

Firmware Upgradeable
Cuboid Mini comes with the upgradeable firmware.
Having Version 3.00 for Cuboid Mini, Temp-SS316 and customized TCR are available.

Multiple Atomizer Heads Can Be Applied
NotchCoilTM 0.25ohm DL . head, BF SS316 Series Heads, BF Clapton-1.5ohm head, BF Ni, BF Ti and BF RBA head.

Multiple BF Series Heads for Your Choice
Cuboid Mini Kit
Customized TCR Available Cuboid Mini Kit
Cuboid Mini enables you to adjust TCR values for different materials,
thus further improving the accuracy of temperature control and bringing you the great taste.
There are three options (M1, M2, M3) for you to customize the TCR according to the material.
In power-off condition, press the fire button and the right regulator simultaneously for around 5 seconds,
then you enter into the TCR set menu:
And here's the TCR Value Range for your reference:
Cuboid Mini Kit

Exquisite 510 Stainless Steel Thread
Applied with 510 stainless steel thread and wide border fitting for large capacity atomizers.
Cuboid Mini Kit

Bottom Ventilation Holes
The ventilation holes are placed on the bottom which can greatly help the device for better heat dissipation.
Note: Should you get stuck while upgrading, just press the "+" button and then insert into the reset hole with a needle to restart. 
Cuboid Mini Kit

Charging & Upgrading
The micro USB port is on the top of the left side. Connect it with a micro USB cable to charge or upgrade
your device. When it's fully charged, the charging indicator will go out. Cuboid Mini Kit
Cuboid Mini Kit
5 Stars
Where has this been all my life?
I've been using this little guy for the past 2 weeks and I absolutely love it. Joytech really thought of everything with this set up. Top notch quality and superior function. I vape mouth to lung (former smoker) and Joytech's cubis and cuboid line is the first sub-ohm I've been able to find that doesn't have an overly airy draw. I'm not burning through coils like I did on my previous tanks either. The 0.25 notch and 0.6 coils are amazing. I can't recommend this enough, it really is what I've been wanting for years and I'm so glad I found it. I think the only thing I could wish for would be a high capacity battery, but that is just being picky. Tip: If you're coil starts to taste a little burnt, take a couple of draws without pressing the button to draw more juice into the coil. Works perfectly after that.
Did you find this helpful?  4 of 4 Found Helpful
Reviewed by: (Verified Buyer)  from Marlyand. on 5/26/2016
5 Stars
Better than I hoped for
This is the best i have ever tried. The perfect vape every hit. Easy to fine tune for different e-liquids. All this control, long long battery life and even looks for only $40.
Did you find this helpful?  3 of 3 Found Helpful
Reviewed by:  from FL. on 6/30/2017
1 Stars
Airflow O-Ring Breaks
First off, this could be an all around perfect APV, when used with the SS316 1.0 ohm DL atomizer this device produces a great vaping experience. The battery life is not the greatest if you use higher wattages, expect to charge it every 2-4 hours. Now for the assembly and construction review. There are a lot of parts for this APV, which translates to a multitude of possible failure points, and just as many silicone o-rings within the mini-tank. I purchased my Cuboid Mini about a month ago and already the Airflow O-Ring broke which controls the amount of airflow and holds the metal sleeve in place. After spending an inordinate amount of time searching the web for replacement parts found that Joyetech does not sell the very parts which have the highest level of breaking on you and based on my research, these O-Rings break very very often for owners of this device. You should consider this factor when purchasing this item, if you decide to purchase this product, you should stock up on purchasing the only replacement part that Joyetech does sell which is the complete mini-tank found on Joyetech's official store website. As a result of only having this APV for 30 days or less and it's already had a significant part failure I'm giving this a 1 Star. If anyone knows where to find these replacement O-Rings please share! Since I can't paste any links to photos of the O-Rings, you can search for the Reddit Article titled "Replacement o-ring for Cubis Airflow ring" which shows the 5 different O-Rings within the Min-Tank.
Did you find this helpful?  2 of 3 Found Helpful
Reviewed by: (Verified Buyer)  from Phoenix, Arzona. on 4/2/2017
5 Stars
Cuboid mini review
I am so pleased with my cuboid mini, it's lightweight, works every time and is user friendly. I was very happy with the fast shipping. All around awesome product.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by: (Verified Buyer)  from Wyoming . on 6/9/2016
5 Stars
Love it
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from Cottage Grove. on 11/12/2017
1 Stars
Don't care for this mod at all! Should of stuck with the EGO AIO
Did you find this helpful?  0 of 2 Found Helpful
Reviewed by:  from Lake Havasu City. on 7/28/2017

Reward Points

40 points will be rewarded to you when you buy this item.

Related Items

Recently Viewed Items