WARNING: This Product Contains nicotine. Nicotine is an addictive chemical.
Efan IMR 18650 35A 3200mah 3.7v high amp battery flat top
Nominal SpecificationWeight: 55g/pc
Item
Condition / Note
Specification
Capacity
Std. charge / discharge
3200mAh
Nominal Voltage
Average of Std. Discharge
3.70V
Standard Charge
Constant current
1560mA
Constant voltage
4.20V
End current(Cut off)
50mA
Fast Charge
4000mA
4.20V± 0.05V
100mA
Max. Charge Voltage
Max. Charge Current
Standard Discharge
500mA
Fast Discharge
End voltage(Cut off)
2.5V
Max. Discharge Current
Max discharge
35A
Weight
Approx.
Max. 49.0G
Operating Temperature
Charge
0 ~ 50°C
Discharge
-20~ 60°C
Storage Temperature
1 month
-20 ~ 60°C
3 months
-20 ~45°C
1 year
-20 ~ 20°C
Dimension
(D)18.2 + 0.2/-0.3 mm
(H) 65.25 ± 0.2 mm
Warranty is DOA only. Domestic customers have 7 days from delivery date to report a DOA battery. International customers have 30 days to report DOA due to extended delivery times for international orders.
WARNING: These IMR cells have much lower internal resistance than regular LiIon 3.7V cells and they may end up with a higher ending voltage when charged in certain chargers ( especially an older version WF-139 charger ). Please check the voltage of them right out of the charger to see if they are above 4.20V when fully charged with your charger. Overcharging above 4.25V may shorten life/cycles. Above 4.50V may even pop them or make them leak. DO NOT use the charger if it seems to overcharge IMR cells.
Use Caution:
* General Information *
mAh = Miliamp Hours: This generally refers to the amount of energy a fully charged battery can store. A higher mAh rating does not generally offer any short term improvements, although a higher mAh rating does indicate that a fully charged battery will preform over a longer period of time. For example, a 1100 mAh battery will operate a device drawing 100 milliamps for 11 hours and a device drawing 1100 milliamps for 1 hour. The amount of milliamps that your mod will draw depends on the voltage of the battery (and/or any switch contained in the mod) and resistance (ohm). If you are in-doubt, contact the mod manufacturer or have your mod tested at a local electronics shop.
